Pass4sure Cisco 300-115 Practice Test

Cisco

Exam 300-115

Implementing Cisco IP Switched Networks

Version: Demo

[ Total Questions: 10 ]

Question No : 1

You have been asked to install and configure a new switch in a customer network. Use the console access to the existing and new switches to configure and verify correct device configuration.

Examine the VTP configuration. You are required to configure private VLANs for a new server deployment connecting to the SW4 switch. Which of the following configuration steps will allow creating private VLANs?

A. Disable VTP pruning on SW1 only

B. Disable VTP pruning on SW2 only

C. Disable VTP pruning on SW4 only

D. Disable VTP pruning on SW2, SW4 and New_Switch

E. Disable VTP pruning on New_Switch and SW4 only.

Answer: C

Question No : 2

What is the function of NSF?

A. forward traffic simultaneously using both supervisors

B. forward traffic based on Cisco Express Forwarding

C. provide automatic failover to back up supervisor in VSS mode

D. provide nonstop forwarding in the event of failure of one of the member supervisors

Answer: D

Question No : 3

On which interface can port security be configured?

A. static trunk ports

B. destination port for SPAN

C. EtherChannel port group

D. dynamic access point

Answer: A

Question No : 4

Which SDM template disables routing and supports the maximum number of unicast MAC addresses?

A. VLAN

B. access

C. default

D. routing

Answer: A

Question No : 5

The network manager has requested that several new VLANs (VLAN 10, 20, and 30) are allowed to traverse the switch trunk interface. After the command switchport trunk allowed vlan 10,20,30 is issued, all other existing VLANs no longer pass traffic over the trunk. What is the root cause of the problem?

A. The command effectively removed all other working VLANs and replaced them with the new VLANs.

B. VTP pruning removed all unused VLANs.

C. ISL was unable to encapsulate more than the already permitted VLANs across the trunk.

D. Allowing additional VLANs across the trunk introduced a loop in the network.

Answer: A

Question No : 6

A network engineer is extending a LAN segment between two geographically separated data centers. Which enhancement to a spanning-tree design prevents unnecessary traffic from crossing the extended LAN segment?

A. Modify the spanning-tree priorities to dictate the traffic flow.

B. Create a Layer 3 transit VLAN to segment the traffic between the sites.

C. Use VTP pruning on the trunk interfaces.

D. Configure manual trunk pruning between the two locations.

Answer: C

Question No : 7

After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD packets. This port continues to reestablish until after eight failed retries. The port then transitions into the errdisable state. Which option describes what causes the port to go into the errdisable state?

A. Normal UDLD operations that prevent traffic loops.

B. UDLD port is configured in aggressive mode.

C. UDLD is enabled globally.

D. UDLD timers are inconsistent.

Answer: B

Question No : 8

Refer to the exhibit.

What is the result of the SPAN configuration on a Cisco switch?

A. Configure a SPAN session to monitor the received traffic on interface g0/4 only for VLAN 3.

B. Configure a SPAN session to monitor the received traffic on interface g0/4 for all VLANs except VLAN 3.

C. Configure a SPAN session to monitor the received traffic on interface g0/5 only for VLAN 3.

D. Configure a SPAN session to monitor the received traffic on interface g0/5 for all VLANs except VLAN 3.

Answer: A

Question No : 9

Which configuration command ties the router hot standby priority to the availability of its interfaces?

A. standby group

B. standby priority

C. backup interface

D. standby track

Answer: D

Question No : 10

Refer to the exhibit.

Which configuration ensures that the Cisco Discovery Protocol packet update frequency sent from DSW1 to ALS1 is half of the default value?

A. DSW1(config)#cdp timer 90

B. DSW1(config-if)#cdp holdtime 60

C. DSW1(config)#cdp timer 30

D. DSW1(config)#cdp holdtime 90

E. DSW1(config-if)#cdp holdtime 30

F. DSW1(config-if)#cdp timer 60

Answer: C

300-115: Implementing Cisco IP Switched Networks (SWITCH v2.0)

Cisco is a leading force in the IT department, and by having your name associated with Cisco can really boost your 300-115 career.  The 300-115 exam is one of the most important exam in IT department and by clearing this exam can create many career opportunities for you. The Implementing Cisco IP Switched Networks (SWITCH v2.0) exam will test your skills and Pass4sure 300-115 knowledge. We know how much this exam means to you, thus we have compiled the best 300-115 Q&A actual questions study material you can find online. This actual questions study material for the 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) exam will provide you with all the necessary information to you need for this 300-115 exam

Pass4Sures has teamed up with professionals at Cisco as well as trainers and lecturers to assemble this actual questions study material for you. Our 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) actual questions study material contains of question and answers that will help you learn all you need for the 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) exam.

Our Pass4sure 300-115 actual questions study material questions answers PDF is fully up to date according to the current course outline and it is always being reviewed for changes, so that it is always updated to match the outline provided by Cisco. Our team of IT experts always keep a watchful eye on Cisco and their outline, so they can match our 300-115 questions answers PDF to the current course outline.

Fully Detailed and Easy to Use

Now days you can find actual questions study material s for 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) exam all over the internet, but none of them can match the standard or detail of our actual questions study material. Not only is our material s up to date but also easy to use. To make learning easy and fast, Pass4Sures provides pass4sure 300-115  Questions with verified answers in a PDF format. This allows you to continue studying anywhere and anything since the PDF file is supported on almost every device and computer that runs Adobe Acrobat Reader or any other application that can open a 300-115 PDF file.

Free Sample and Money Back Guarantee

We at Pass4Sures know the importance of your time and money; hence, we are offering free downloadable samples to our pass4sure 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) actual questions study material. Not only that, we also offer a 30 days money back guarantee in case you are not satisfied with our actual questions study material . You can find online support at our website 24 hours, 7 days a week. So download the free 300-115 demo, check the 300-115 PDF and if you still do not feel satisfied. Simply contact us and avail the 100% money back guarantee service within 30 days of the purchase.

How to Order

We have made the ordering and purchasing of the 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) actual questions study material simple and fast. All you need is a PayPal account to purchase this actual questions study material. Simply add this actual questions study material to your cart and once you have purchase the pass4sure 300-115 Cisco practice material for the Certified Network Associate exam you can simply download it and start learning. We use PayPal as our primary method of payment as this is the most secure method available on the internet. Keeping your information safe and private is important to use, so that you can purchase any actual questions study material s without any hesitations.